產品詳情
“在邦”快干二硫化鉬潤滑噴劑使用說明書
"ZAI BANG" Dry Molybdenum disulfide lubricant spray
Product Specification
快干二硫化鉬潤滑噴劑是由超細二硫化鉬（MoS2)顆粒、快干劑、高效粘合劑、分散劑、乳化劑、氣霧劑和推動劑經混合灌裝生產的一種高效二硫化鉬氣霧潤滑噴劑。廣泛應用于機械、造船、鋼鐵、紡織、鍛造、五金、航空等諸多行業。
Dry molybdenum disulfide lubricant spray is made of the ultrafine molybdenum disulfide (MoS2) particles, drying agent, efficient adhesives, dispersants, emulsifiers, aerosols and propellant through the process of mixing and filling. The efficient molybdenum disulfide aerosol lubricant sprays are widely used in machinery, shipbuilding, steel, textiles, forging, hardware, aviation and other industries.
產品用途 Application
1.預組裝處理：干性潤滑劑可以在裝配時提供保護。使用噴罐時，將會在所裝配零件表面形成超薄潤滑涂層，不會改變零件的配合公差。二硫化鉬微粒的平均粒徑僅爲0.5微米。如：開放式齒輪、機械的組裝、模具組裝/發電所的感應槽、蒸汽發電機等。
1. Pre-assembly process: dry lubricant can provide protection during assembly. When using spray cans, the product will b a thin lubricating coating on the surface of the assembled parts with no change in fit tolerance. The average particle size of molybdenum disulfide is only 0.5 micron meters. The lubricant is suitable in open gears, mechanical assembly, mold assembly / power generation induction groove, steam generators and so on.
2.保護薄膜：干性潤滑劑可以作預先潤滑，即取即用。適用于裝配機件及內部潤滑，潤滑鏈條、鋼纜、螺絲、輸送帶、拉纜機、金屬鑄造機、墊圈外膜、一般機器的維修和保養，高溫操作儀器，橡膠脫模，玻璃加工等.
2. Protection film: dry lubricant can be used for pre-lubrication and immediate use. It is applicable for internal lubrication of assembly parts and other lubrications for chains, wire ropes, screws, conveyor belt, pulled-cable machines, bl casting machine, washer outer membrane, general machinery repair and maintenance, high-temperature operating instrument, rubber stripping, glass processing and so on.
3.高溫潤滑劑：干性潤滑劑在-80℃至280℃可以形成穩定的潤滑膜。二硫化鉬在高溫達到450℃（在氣壓降低的情況下甚至更高）時仍然可以干式潤滑，盡管樹脂在這樣的溫度下會遇熱熔化。適用于煉鋼、紡織機械維修業。干性潤滑劑在鋼鐵工業中作爲高溫潤滑劑被廣泛應用。
3. High-temperature lubricant: dry lubricant can b a stable lubricating film between -40 ℃ and 200 ℃. Molybdenum disulfide is able to perb dry lubrication even at high temperature up to 450 ℃ (even higher temperature in the case of a reduction in pressure), although the resin at such temperature will encounter melting. The product is suitable for steel and textile machinery repair industry. Dry lubricant in the steel industry has been widely used as a high-temperature lubricant.
4.潤滑性效能：干性潤滑劑避免了常規濕式潤滑劑在應用時出現的問題，在灰塵過多的情況下可以提供干性潤滑。本產品可用于潤滑以及保護礦業中的粗吊鈎及適用于紡織機械的自動絡筒機、熱定型機螺桿、拉幅定型機、染色機、蒸化機、烘燥機、紡絲機、印花機、絲光機等軸承的潤滑.
4. Lubrication Effectiveness: dry lubricant has avoided the problems when conventional wet lubricants are used in application, where dry lubricants provide better solution in the case of excessive dust. This product can be used to lubricate and protect the mining of crude hooks and suitable for textile machinery, automatic winder, screws of heat-setting machine, stenter, dyeing/dying/spinning/printing machines, steamers, mercerizer, bearings and so on.
5.切割工具：干性潤滑劑應用于切割刀具，可以得到最佳效益。刀具表面缺痕中所嵌二硫化鉬將使切割機切割時的效果發揮到最大。
5. Cutting Tools: dry lubricant applied to the cutting tool has shown a better effectiveness. Molybdenum disulfide applied on the marks of surface of cutting machines maximize the working efficiency.
6.塑料表層：干性潤滑劑噴涂于塑料表面更能突現產品優點，如尼龍軸承。
6. Plastic Surface: dry lubricant sprayed on the plastic surface has shown a more emergent advantage in applications such as in nylon bearings.
主要性能 Key Feature
1. 具有良好的熱穩定性、抗極壓性、防銹性能和潤滑性能，粘附性強。
1. Good thermal stability, resistance to extreme pressure, anti-rust/lubricating properties and strong adhesion.
2.本品吸附于金屬表面上，形成緊密的保護膜和潤滑膜，起到良好的保護和潤滑作用。
2. The product adsorbed on the bl surface will b a tight protective lubricant film, achieving good protection and lubrication.
3.有較寬的溫度適應空間，耐低溫-80℃、最佳耐溫區間-40℃——200℃，間歇耐高溫280℃。
3. There is wide temperature adaptation space with low temperature up to -80 ℃. The optimum temperature range is between -40 ℃ --200 ℃ with intermittent high temperature at 280 ℃.
4.產品技術成熟、質量穩定、性價比好、攜帶方便和使用簡單。
4. The product is cost effective and easy to transport/use with mature technology and stable quality.
使用方法 Instruction
1.使用前，先將工件表面進行徹底的清潔除油處理。
1. Before use, first thoroughly clean the surface degreasing.
2.然后將罐體用力搖勻約30秒，使罐液充分攪拌，以利于噴霧均勻。
2. The can is then forced to shake for about 30 seconds, so that the liquid will be well stirred in order to facilitate a unib spray.
3.噴涂時，距離工件約20厘米左右移動噴涂，勿固定在一個位置噴涂。
3. Spray from about 20 cm to move around the workpiece and do not spray in one fixed b.
4.使用后，倒轉罐身噴射約5秒，作用為清洗噴咀，以防塞咀。
4. After use, invert cans upside down for about five seconds. The role is to clean nozzles to prevent clogging.
5.使用本品時應詳細閱讀產品使用說明書，并在專業人員指導下進行使用。
5. Users should carefully read the product manual and use under guidance of the professionals.
注意事項 Precautions
1. 本品易燃，使用時嚴禁煙火，存放于50℃以下陰涼處，空罐不得拋入火中。
1. The product is flammable and prohibited to use under fireworks. Please stored in a cool place below 50 ℃. Empty cans must not be thrown into the fire.
2.使用前應將工件表面上的銹跡、重度油污清洗干凈，以免影響后續的噴涂及防腐潤滑效果。
2. Before the use, rusts and oil grease on the workpiece surface should be cleaned, so as not to affect the subsequent anti-corrosion coating and lubrication.
3.若不慎濺入眼睛，可提起眼瞼，用流動清水或生理鹽水沖洗干凈。
3. If accidentally splashed into the eyes, please rinse with running water or saline.
4.不可吞食本產品。若不慎吞食，勿催吐，保持休息狀態，及時進行醫護。
4. Do not swallow the product. If swallowed, do not induce vomiting. Please rest and immediaby approach to hospital for medical treatment.
包裝貯存 Packing and Storage
1.包裝：500ml/罐，12罐/件，24罐/件 。
1. Package: 500ml / cans, 12 cans / suite, 24 cans / suite.
2.貯存：貯存于陰涼、干燥通風處。
2. Storage: please stored in cool and dry ventilated places.
