產品詳情
防紫外線駕駛鏡蛤蟆鏡偏振軸位測試機/駕駛鏡蛤蟆鏡偏光測試儀
偏振軸位測試儀技術參數
1.讀數度盤：-15-+15°
2.最小讀數：1°
3.光源：鈉燈(589nm)
4.外形尺寸:27×37×34 CM(長×寬×高)
5.重 量:10 Kg
6.輸入電壓：AC100~240V 50/60Hz
1. 將正確之電源送上，將電源開關打開即可。
產品優點：此產品可替代意大利 LEMA PA1 產品
Technical beters of polarization axis tester
1 reading dial: -15-+15 degrees
2 minimum reading: 1 degrees
3 light source: sodium lamp (589nm)
4 dimensions: 27 x 37 x 34 CM (L * w * h)
5 weight: 10 Kg
6 b voltage: AC100~240V 50/60Hz
Polarization axis tester
1 the correct power supply, the power switch can be turned on.
2 will be required to test the glasses, fixed in the test b; that is, before the light source, up and down the 2 plastic fixture b. This fixture can adjust its angle, the angle must be adjusted according to the different radian of the frame, the adjustment must be parallel to the two light sources, and the front and back of the eye must be the same.
3 test glasses after fixation test from the rectangular machine front top type observation hole, the test in the semicircle and the lower semicircle light source brightness is the same; if different, to adjust the two light source below the handle, the brightness of its two light source under the same, the same look above the light source the two pointer refers to each for a few degrees, that is the test results.
Product advantages: This product can replace Italy LEMA PA1 products
