產品詳情
MVME6100 系列是第一款采用 Tundra Tsi148 VMEbus 接口芯片設計的 VMEbus 單板計算機 (SBC)，提供兩個邊緣源同步傳輸 (2eSST) VMEbus 性能。在大多數情況下，2eSST 協議使 VMEbus 能夠以 320MB/s 的實際帶寬運行。MVME6100 旨在滿足為國防和航空航天、工業自動化和醫學成像細分市場提供服務的 OEM 的需求。
主要特點
- 2eSST VMEbus 協議，VMEbus 傳輸速率為 320MB/s
- MPC7457 PowerPC® 處理器運行頻率高達 1.267 GHz
- 用于并行處理的 128 位 AltiVec 協處理器，非常適合數據密集型應用
- 高達 2GB 的板載 DDR ECC 內存和 128MB 的閃存，適用于要求苛刻的應用
- 兩個 33/66/100 MHz PMC-X 站點允許添加行業標準的應用特定模塊
- 用于高性能網絡的雙千兆以太網接口
Industrial Automation
The MVME6100 is also ideally suited for semiconductor process
equipment (SPE), automated test equipment (ATE) and a variety of
other high-end industrial automation applications because of its
increased bus bandb and faster processing speeds. The
backwards compatibility of the MVME6100 series with existing VME
products helps to provide OEMs a way to extend the life and
capability of their current designs without sacrificing existing key
hardware and software investments. The DSP-like AltiVec
technology, which is incorporated into the processor, allows the
MVME6100 series to be used for an assortment of vector
processing applications. And with two PMC sites, the MVME6100
series can be customized.
Medical Imaging
Medical imaging applications such as Nub Medicine (NM),
Positron Emission Tomography (PET), Magnetic Resonance Imaging
(MRI), X-Ray and Computed Tomography (CT) that entail intensive
image processing, manipulation and algorithm-intensive
computations can benefit from the 2eSST protocol’s 8x increase in
VMEbus transfer rates. With the ability of the MVME6100 series to
work with existing VMEbus backplanes and boards, OEMs can
increase their overall system perbance while protecting their
software and hardware investments. The perbance of the
MVME6100 series also helps OEMs to reduce the overall number of
bded cards required in a medical imaging application so that
space issues become less of a factor.
Backward Compatibility
The MVME6100 series continues the direction of providing a
migration path from Artesyn’s bded controllers such as the
MVME2300/MVME2400 and from Artesyn SBCs such as the
MVME2600/2700 to a single platb. The MVME6100 series, like
the MVME5100 and MVME5500 series, merged the best features of
Artesyn’s bded controllers and SBCs enabling OEMs to
support varying I/O requirements with the same base platb,
simplifying part number maintenance, technical expertise
requirements and sparing.
The MVME6100 series offers customers a migration path from the
MVME2300, MVME2400, MVME2600, MVME2700, MVME5100
and MVME5500 boards to allow them to take advantage of features
such as the MPC7457 processor, DDR memory, Gigabit Ethernet,
PCI-X and 2eSST.
PCI Expansion
The MVME6100 has a 32/64-bit, 33/66 MHz PCI connection to
support PCI expansion carriers such as the Artesyn PMCspan.
P2 I/O Modes
The MVME6100 series supports two, jumper-configurable P2 I/O
modes: the PMC mode and IPMC mode. PMC mode is backwards
compatible with the MVME2300/MVME2400 and MVME5100/
MVME5500 in PMC mode. In PMC mode, 64 pins from PMC slot 1
and 46 pins from PMC slot 2 are available on P2 for PMC rear I/O. In
IPMC mode, the MVME6100 series supports legacy MVME761 or
MVME712M I/O modules (with limited PMC I/O) when an IPMC761 or
IPMC712 PMC card is populated in PMC slot 1. In this configuration,
PMC slot 2 contains some signals that are reserved for extended SCSI.
Transition Modules
The MVME761 transition module provides industry standard
connector access to the IEEE 1284 parallel port, a 10BaseT or
100BaseT port via an RJ-45 connector, two DB-9 connectors
providing access to the asynchronous serial ports configured as
EIA-574 DTE and two HD-26 connectors providing access to
the sync/async serial ports. These serial ports, labeled as Serial 3
and Serial 4 on the faceplate of the MVME761, are individually
user-configurable as EIA-232, DCE or DTE via the installation of
Artesyn Serial Interface Modules (SIMs). A P2 adapter board
provides interface signals to the MVME761 transition module. Two
separate P2 adapter boards are available: one for 3-row backplanes
and one for 5-row backplanes. The 3-row P2 adapter board
provides connection for 8-bit SCSI. A 5-row P2 adapter board
supports 16-bit SCSI and PMC I/O.The MVME712M transition
module provides industry standard connector access to the
Centronics parallel port, a narrow SCSI port, and four DB-25
connectors providing access to the asynchronous/synchronous
serial ports jumper configurable as EIA-232 DCE or DTE. A P2
adapter board provides interface signals to the MVME712M
transition module. The 3-row P2 adapter board also provides
connection for 8-bit SCSI. To gain access to the additional userdefinable I/O pins provided via the 5-row VME64 extension
connector, a special P2 adapter board is available. This adapter
panel replaces the traditional 3-row P2 adapter board and extends
its capability by providing access to the PMC I/O pins.
