產(chǎn)品詳情
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes provide excellent high-speed electrical and mechanical perbance required for today's Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed digital system designs.
Key perbance specifications
- 1 GHz and 500 MHz probe bandb
- <1 pF differential b capacitance
- 1 MΩ differential b resistance
- ±42 v (DC + pk AC) differential b voltage
- >18 dB CMRR (at 250 MHz 50X attenuation)
Key features
-
Outstanding electrical perbance
- Selectable bandb-limiting filters
- DC reject
-
Versatile DUT connectivity
- Small compact probe head for probing small geometry circuit elements
- Straight pin, square pin, solder down, variable pitch standard accessories
- Robust design for reliability
-
Easy to use
- Provides automatic units scaling and readout on the oscilloscope display
-
TDP1000, TDP0500
- Connect directly to oscilloscopes with the TekVPI? probe interface
- Easy access to scope-displayed probe menu for probe setup control and operating status inbation
- Remote GPIB/USB probe control through the oscilloscope
- AutoZero – zeros out output offset
-
P6251
- Connect directly to the TekProbe? interface oscilloscopes, or to TekConnect® oscilloscopes using TCA-BNC adapter
Applications
- High-speed switch mode power supply design
- CAN/LIN bus design
- Digital design and characterization
- Manufacturing engineering test
- Research and development
High-voltage differential probes
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes are specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI? probe interface, or TekProbe BNC Interface. These probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:
- Outstanding Electrical Perbance
- Versatile Device-Under-Test Connectivity
- Ease of Use
|
|
|
|
|
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. |
|
|
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
SpecificationsAll specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. Warranted characteristicsBandb (probe only)TDP1000, P62511 GHzTDP0500500 MHzAttenuation5X, 50XDifferential mode b voltage±42 v (DC + pk AC); 30 VrmsRise time (probe only)TDP1000, P6251≤350 psTDP0500<700 psCMRR>55 dB at 30 kHz>50 dB at 1 MHz >18 dB at 250 MHz (warranted at 50X attenuation) Max b voltage (nondestruct)±100 V (DC + pk AC)Gain accuracy at DC±2%Typical characteristicsDifferential b capacitance≤1 pFDifferential b resistance1 MΩSensitivity/noise level5X attenuation2 mVrms10 mVrms(referred to the probe output) 50X attenuation1 mVrms50 mVrms(referred to the probe output) Propogation delay6.5 nsCommon mode b voltage±35 v (DC + pk AC); 25 VrmsDifferential b offset rangeTDP1000, TDP0500±42 V (5X or 50X attenuation)P6251±4.25 V (5X attenuation)±42 V (50X attenuation) DC reject5X attenuation0.4 Hz50X attenuation4 HzNominal characteristicsSelectable bandb filter limitsTDP1000, TDP0500100 Hz, 10 kHz, 1 MHz, FullP62515 MHz, FullOscilloscope interface recommendationsTDP1000, TDP0500TekVPI? Probe 1P6251TekProbe BNC Level IITekConnect® (TCA-BNC required) 1When using MSO/DPO2000/B series, the TekVPI Power supply (Tektronix part number, 119-7465-xx) and power cable is needed. Power requirements
TDP1000, TDP0500Powered directly by oscilloscopes with the TekVPI interface
|
